capello CR15 Alarm clocks Operation & user’s manual PDF View/Download, Page # 2 (2024)

setting the clock

u

Plug in the unit.

v

Press and hold the TIME SET button until the clock ashes in the display.

w

Press the TUNE DOWN / HOUR button repeatedly to set the hour and press the

TUNE UP / MIN button repeatedly to set the minute.

x

Press the TIME SET button again to store the new clock setting.

note: If you do not press any button for about 10 seconds while setting the clock,

the clock setting will be canceled.

playing the radio

u

With the CR15 plugged in and powered ‘ON’, press TIME SET / BAND button to

select FM or AM band.

v

Repeatedly press the TUNE UP / MIN or TUNE DOWN / HOUR button to manually

adjust the tuning on the display until the desired station appears.

w

For auto tuning, press and hold the TUNE UP / MIN or TUNE DOWN / HOUR

button until the display starts to scan then release the button and the tuner will

search and stop on the next strongest station it nds. Repeat this process until

the desired station appears on the display.

notes: Fully extend the FM wire antenna to increase reception sensitivity.

Keep digital music players or mobile phones away from the FM antenna as this

may cause interference. Do not place the FM antenna near the AC power adaptor

as this may lead to reception interference.

setting radio presets

u

To preset a radio station to memory, rst follow the steps above to tune in the

desired station.

v

Press and hold the ALARM SET / PRESET button to create a preset for the current

station. “P” will appear and “##” (the preset number) will blink on the display.

w

Press the TUNE UP / MIN or TUNE DOWN / HOUR button to select a preset

number (01- 10). Press the ALARM SET / PRESET button again to conrm the

setting and the station will be saved into memory.

x

Repeat these steps for up to 10 presets, as desired.

note: Saving a new station preset in the same position as a previously saved

station will replace the previously stored station for that preset number.

recalling radio presets

To recall saved presets, repeatedly press the ALARM SET / PRESET button until the

desired preset number appears in the display and the unit tunes to the station.

setting the alarm

u

In STANDBY mode, press and hold the ALARM SET / PRESET button, the alarm

time will ash.

v

Press the TUNE DOWN / HOUR or TUNE UP / MIN button to set the alarm time.

w

Press ALARM SET / PRESET button to conrm the alarm time set.

x

Alarm source indicator (default as alarm radio) will blink on the display. Press TUNE

DOWN / HOUR or TUNE UP / MIN button to set the desired alarm source (Chime or

Radio). The indicator of the selected alarm source will blink on the display.

y

Press ALARM SET / PRESET button to conrm the alarm source set, the volume level

will blink on the display (there is no volume setting if alarm source is set to Chime).

U

Press TUNE DOWN / HOUR or TUNE UP / MIN button to set maximum alarm volume.

V

Press ALARM SET / PRESET button to conrm the alarm set and the alarm

indicator will appear on the display.

notes: To deactivate the alarm, press ALARM SET / PRESET button, the alarm

indicator will turn off.

Before setting the alarm, make sure that the clock is set correctly

(see “Setting the clock”).

silencing the alarm

When the alarm sounds, press ALARM SET / PRESET button to silence the alarm.

snooze

u

When alarm sounds, pressing the SNOOZE / SLEEP button will temporarily

silence the alarm. The alarm will sound again after approximately 10 minutes.

v

To extend the snooze duration, repeatedly press the SNOOZE / SLEEP button to

cycle through and select one of the snooze presets:

10 20 30 40 50 6 0

notes: Once the snooze function has been activated, press the SNOOZE / SLEEP

button anytime and the display will show the remaining time.

Repeatedly press the SNOOZE / SLEEP button to adjust or modify the current

snooze time setting.

setting the sleep timer

The CR15 features a sleep timer to allow you to fall asleep to the radio using the

built-in sleep timer to automatically turn off the radio.

u

When the unit powered ‘ON’, press the SNOOZE / SLEEP button. The SLEEP

icon and “15” will appear on the display briey indicating the unit will turn off

after 15 minutes.

v

To increase the sleep time duration, up to a maximum of 90 minutes,

repeatedly press the SNOOZE / SLEEP button to select one of the following

sleep time presets:

15 30 60 90 OFF

w

With the sleep timer active, press SNOOZE / SLEEP button once to view the

remaining sleep time.

x

To cancel the sleep timer function, repeatedly press the SNOOZE / SLEEP

button until “OFF” appears in the display.

location of controls

u

Speaker

v

FM Antenna Wire

w

ALARM SET / PRESET

x

Power ON / OFF

y

TUNE UP / MINUTE

U

TUNE DOWN / HOUR

V

SNOOZE / SLEEP

W

LED Display

X

Battery Compartment (bottom)

at

VOLUME +

ak

VOLUME –

al

TIME SET / BAND (AM/FM)

am

AC Power Adaptor

an

ALARM ‘Radio’ Indicator

ao

ALARM ‘Chime’ Indicator

ap

Low Battery Indicator

aq

PM Time Indicator

ar

LED Display

as

SLEEP Indicator

1

For further assistance, please visit our website at hellocapello.com

or contact customer service at suppor[emailprotected] or 1-855-896-1795

Life Lab International Ltd.

specifications

GENERAL:

Power Source ...................................................................... AC 7.5V 100mA AC/AC Adapter

AC Power Supply ............................................................................................120V ~ 60Hz

Battery Backup ........................................................................ 2 x 1.5V “AAA” size batteries

RADIO SECTION:

Frequency Range (FM) ................................................................................87.5 – 108 MHz

Frequency Range (AM) .............................................................................. 530 – 1710 KHz

Specications are subject to change without notice.

3

2

13

14

16

15

7

17

4

5

6

12

11

10

9

8

19

18